Impex SM-3000 Bedienungshandbuch PDF herunterladen (Seite 5)

SMITH MACHINE ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended two or more people assemble this machine to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Rear Base Frame (#3) to the Left Base Frame (#1). Secure it with two

M10 x 3” Carriage Bolts (#66), one Bracket (#7), two ∅ ¾” Washers (#5), and two

M10 Aircraft Nuts (#6). DO NOT tighten all the nuts and bolts yet. Only finger-

tighten for now.

B.) Repeat the above procedure to attach the Right Base Frame (#2).

C.) Attach the Front Vertical Beam (#9) to the bracket on the Left Base Frame (#1).

Secure it with two M10 x 2 ¾” Carriage Bolts (#11), ∅ ¾” Washers (#5), and M10

Aircraft Nuts (#6). Repeat the same procedure to install the other side.

D.) Attach the Guide Rod (#16) to the circular clamp on the Left Base Frame (#1).

Secure the M8 x 3/8” Allen Screw (#60) with an Allen wrench. Repeat the same

procedure for the other side.

E.) Attach the Rear Vertical Beam (#8) and Lat Bar Base (#10) to the Rear Base

Frame (#3). Secure it with two M10 x 3” Carriage Bolts (#66), ∅ ¾” Washers (#5)

and M10 Aircraft Nuts (#6).

1 2 3 4 5 6 7 8 9 10 ... 22 23

Keine Kommentare

Impex SM-3000 Bedienungshandbuch Seite 5