Impex SM-3000 Bedienungshandbuch PDF herunterladen (Seite 15)

MULTIPURPOSE BENCH ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended this machine to be assembled by two or

more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Main Frame (#1) to the Front Stabilizer (#2). Align the holes and secure

it with three M10 x 5/8” Allen Bolts (#31) and ∅ ¾” Washers (#39).

B.) Attach the Main Frame (#1) to the Rear Stabilizer (#3). Align the holes and secure

it with two M10 x 5/8” Allen Bolts (#31) and ∅ ¾” Washers (#39).

C.) Slide the Sliding Block (#9) onto the Incline Adjustment Bar (#10). Align the holes

then thread in a Knob Lock (#20) to hold the Sliding Block in position.

D.) Push two Bushings (#23) into the Incline Adjustment Bar (#10). Then attach the

Bushings and the Bar to the bracket on the Main Frame (#1). Secure it with a M10

x 3” Allen Bolt (#33), two ∅ ¾” Washers (#39), and one M10 Aircraft Nut (#41).

E.) Attach two Bushings (#23) to the side of Main Frame (#1). Attach two Bushings

(#23) to the pivot on top of the Main Frame (#1). Attach two Bushings (#23) to the

pivot on the Sliding Block (#9).

DIGRAM 1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Impex SM-3000 Bedienungshandbuch Seite 15